We focus on the R&D, production and sales of 3D printing supplies, printers and printing pens

English
  • 中文

Photopolymer Resin Tutorial

  •  Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight;
  •  Do not take it orally, keep it away from children, wear gloves before use, avoid direct contact with the skin, and keep the room ventilated; do not enter the eyes, in case of accidental contact, rinse with plenty of water as soon as possible.
  •  The printed resin model needs to be cleaned with high-concentration alcohol (recommended above 95% concentration, the higher the better) for about 30s; after cleaning, wait for the alcohol to dry and then perform secondary curing, so that the best performance can be obtained;
  •  Do not pour the used resin in the trough back into the unused resin, and do not leave the resin in the trough for a long time without use. The contamination of the resin affects the printing effect;
  •  Store in the dark at room temperature. The ultraviolet rays in the sun will cure the Photopolymer resin; it is recommended to store it at an ambient temperature of 15-35 °C. The lower the temperature in winter, the higher the resin viscosity;
  •  Keep it sealed to avoid dust or moisture, which will affect the printing quality.

Photopolymer Resin Tutorial

  •  Shake well before use. It is recommended to stand upside down three times. It is forbidden to use resin in places exposed to sunlight;
  •  Do not take it orally, keep it away from children, wear gloves before use, avoid direct contact with the skin, and keep the room ventilated; do not enter the eyes, in case of accidental contact, rinse with plenty of water as soon as possible.
  •  The printed resin model needs to be cleaned with high-concentration alcohol (recommended above 95% concentration, the higher the better) for about 30s; after cleaning, wait for the alcohol to dry and then perform secondary curing, so that the best performance can be obtained;
  •  Do not pour the used resin in the trough back into the unused resin, and do not leave the resin in the trough for a long time without use. The contamination of the resin affects the printing effect;
  •  Store in the dark at room temperature. The ultraviolet rays in the sun will cure the Photopolymer resin; it is recommended to store it at an ambient temperature of 15-35 °C. The lower the temperature in winter, the higher the resin viscosity;
  •  Keep it sealed to avoid dust or moisture, which will affect the printing quality.

 

0756-3385636

 

Address:No.38 Yongtian Road, Zhuhai, Guangdong, China

Email:sales@sunlu.com      support@sunlu.com

 

0756-3385636

 

Address:Sanlu Industrial Park, 38 Yongtian Road, Second Phase, Qianshan Trade and Logistics Center, Xiangzhou District, Zhuhai City

email:sales@sunlu.com      support@sunlu.com

 

Shopping       Service       Solution       About us

Privacy Policy    Terms of use    Website problem feedback

Copyright © 2022. All Rights reserved. Zhuhai Sunlu Industrial Co., LTD

Service Center

Please choose online customer service to communicate

Contacts
Tel
0756-3385636
Time
Mon-Fri 8:30-18:00
E-mail
123456@qq.com
E-mail
sales@sunlu.com
E-mail
support@sunlu.com
E-mail
Branding@sunlu.com
Scan a QR Code
Qrcode
Facebook
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了