We focus on the R&D, production and sales of 3D printing supplies, printers and printing pens

English
  • 中文

FDM 3D Printer S9 Use Tutorial

S9 use tutorial

  • Put the consumables into the dryer box, and pull out the consumables from the outlet of the dryer box.
  •  Use the included scissors to cut the filament at a 45-degree angle and straighten it.
  •  Press the disconnection detection switch, pass the consumables through the disconnection detection device, then hold the feeding handle, and insert the consumables into the PTFE tube to the end.
  •  Start the device
  •  Leveling
  • Note: (it is recommended to check automatic leveling, electrical material detection, plug detection)
  • For the first use, please adjust the Z-axis data compensation first, and then complete the AUX Leveling manually. After that, go back to the home page, click Print to start, and choose to turn on the auto-leveling function.
  •  Loosen the heated bed nut flush with the screw.
  •  Click Leveling to start platform leveling.
  •  Click Settings -> Leveling, then use a piece of A4 paper, adjust the Z-axis data compensation, and gently press the paper to a state where it can be dragged but has resistance.
  •  Enter the AUX Leveling function, click the numbers in the order of 2-3-4-5 to manually level, and adjust the heat bed nut to make the paper state consistent with (3).
  •  Go back to the home page and click Print (make sure the auto-leveling icon is lit).

FDM 3D Printer S9 Use Tutorial

S9 use tutorial

  • Put the consumables into the dryer box, and pull out the consumables from the outlet of the dryer box.
  •  Use the included scissors to cut the filament at a 45-degree angle and straighten it.
  •  Press the disconnection detection switch, pass the consumables through the disconnection detection device, then hold the feeding handle, and insert the consumables into the PTFE tube to the end.
  •  Start the device
  •  Leveling
  • Note: (it is recommended to check automatic leveling, electrical material detection, plug detection)
  • For the first use, please adjust the Z-axis data compensation first, and then complete the AUX Leveling manually. After that, go back to the home page, click Print to start, and choose to turn on the auto-leveling function.
  •  Loosen the heated bed nut flush with the screw.
  •  Click Leveling to start platform leveling.
  •  Click Settings -> Leveling, then use a piece of A4 paper, adjust the Z-axis data compensation, and gently press the paper to a state where it can be dragged but has resistance.
  •  Enter the AUX Leveling function, click the numbers in the order of 2-3-4-5 to manually level, and adjust the heat bed nut to make the paper state consistent with (3).
  •  Go back to the home page and click Print (make sure the auto-leveling icon is lit).

 

0756-3385636

 

Address:No.38 Yongtian Road, Zhuhai, Guangdong, China

Email:sales@sunlu.com      support@sunlu.com

 

0756-3385636

 

Address:Sanlu Industrial Park, 38 Yongtian Road, Second Phase, Qianshan Trade and Logistics Center, Xiangzhou District, Zhuhai City

email:sales@sunlu.com      support@sunlu.com

 

Shopping       Service       Solution       About us

Privacy Policy    Terms of use    Website problem feedback

Copyright © 2022. All Rights reserved. Zhuhai Sunlu Industrial Co., LTD

Service Center

Please choose online customer service to communicate

Contacts
Tel
0756-3385636
Time
Mon-Fri 8:30-18:00
E-mail
123456@qq.com
E-mail
sales@sunlu.com
E-mail
support@sunlu.com
E-mail
Branding@sunlu.com
Scan a QR Code
Qrcode
Facebook
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了