We focus on the R&D, production and sales of 3D printing supplies, printers and printing pens

English
  • 中文

Dryer Box User Instruction

  • Turn on the power:
  • Plug the 24V/2A power adapter that came with the product into a power outlet, and then connect the wire to the DC outlet of the filament dryer box. Before the drying box is powered on, there is no key operation, and the dryer box is in a standby mode (no heating).
  • Filament drying:
  • Put the filament into the dryer box and pull the filament cord out of outlet. Close the top cover, press any key(left or right), the dryer box will be heated according to the default setting (temperature: 50℃; time: 6 hours).
  • Other settings:
  • A. Temperature setting:
  • Users can adjust the temperature according to the type of filaments, ambient temperature, humidity and other factors. In the working state, press the left button to cool down, and the right button to heat up. After the setting is completed, you need to wait 3 seconds to automatically save the settings.
  • Temperature adjustment range: 35℃~55℃.
  • The measured temperature is displayed as PV, and the set temperature is shown as SV.
  • B. Drying time setting:
  • The default drying time is 6 hours when the machine is turned on, and the drying time can also be set manually. Setting method: When the dryer box is working, press and hold the left button (about 3 seconds) to enter the setting interface, which is displayed as SV Time XXH, press the left button to decrease the time, to press the right one to increase the time. Each press will increase or decrease the time by 1 hour. The setting range is 0~24 hours. After the setting is completed, press the left button (about 3 seconds) to exit, and the dryer box will enter the heating state. After the countdown is completed, the dryer box stops working and enters the dormant standby state.
  • Note: Set to 0 hour, after confirming the exit, the dryer box will immediately enter the dormant standby mode. In the standby state, press the left or right button to enter the working state, the default time is 6 hours.
  • C. Checking the drying time:
  • When the dryer box is in working state, press the left button (about 3 seconds) to view the remaining time of the countdown. After pressing the left button again (about 3 seconds) for exiting, the dryer box enters the heating state.


Dryer Box User Instruction

  • Turn on the power:
  • Plug the 24V/2A power adapter that came with the product into a power outlet, and then connect the wire to the DC outlet of the filament dryer box. Before the drying box is powered on, there is no key operation, and the dryer box is in a standby mode (no heating).
  • Filament drying:
  • Put the filament into the dryer box and pull the filament cord out of outlet. Close the top cover, press any key(left or right), the dryer box will be heated according to the default setting (temperature: 50℃; time: 6 hours).
  • Other settings:
  • A. Temperature setting:
  • Users can adjust the temperature according to the type of filaments, ambient temperature, humidity and other factors. In the working state, press the left button to cool down, and the right button to heat up. After the setting is completed, you need to wait 3 seconds to automatically save the settings.
  • Temperature adjustment range: 35℃~55℃.
  • The measured temperature is displayed as PV, and the set temperature is shown as SV.
  • B. Drying time setting:
  • The default drying time is 6 hours when the machine is turned on, and the drying time can also be set manually. Setting method: When the dryer box is working, press and hold the left button (about 3 seconds) to enter the setting interface, which is displayed as SV Time XXH, press the left button to decrease the time, to press the right one to increase the time. Each press will increase or decrease the time by 1 hour. The setting range is 0~24 hours. After the setting is completed, press the left button (about 3 seconds) to exit, and the dryer box will enter the heating state. After the countdown is completed, the dryer box stops working and enters the dormant standby state.
  • Note: Set to 0 hour, after confirming the exit, the dryer box will immediately enter the dormant standby mode. In the standby state, press the left or right button to enter the working state, the default time is 6 hours.
  • C. Checking the drying time:
  • When the dryer box is in working state, press the left button (about 3 seconds) to view the remaining time of the countdown. After pressing the left button again (about 3 seconds) for exiting, the dryer box enters the heating state.


 

0756-3385636

 

Address:No.38 Yongtian Road, Zhuhai, Guangdong, China

Email:sales@sunlu.com      support@sunlu.com

 

0756-3385636

 

Address:Sanlu Industrial Park, 38 Yongtian Road, Second Phase, Qianshan Trade and Logistics Center, Xiangzhou District, Zhuhai City

email:sales@sunlu.com      support@sunlu.com

 

Shopping       Service       Solution       About us

Privacy Policy    Terms of use    Website problem feedback

Copyright © 2022. All Rights reserved. Zhuhai Sunlu Industrial Co., LTD

Service Center

Please choose online customer service to communicate

Contacts
Tel
0756-3385636
Time
Mon-Fri 8:30-18:00
E-mail
123456@qq.com
E-mail
sales@sunlu.com
E-mail
support@sunlu.com
E-mail
Branding@sunlu.com
Scan a QR Code
Qrcode
Facebook
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了