Toughness Resin

• Elongation at break: 50%
• Flexural Strength: 20MPa
• Flexural Modulus: 829MPa
• IZOD Impact Notched: 120J/m
• Mold Shrinkage: 8%

Compatible with LCD, SLA, and DLP resin 3D printers operating within the UV light wavelength range of 365-405nm.

Precautions

Wear gloves and a mask when handling liquid resin or resin-coated surfaces. Avoid direct contact with skin or eyes.

Wash Settings

• Place the printed model in an ultrasonic cleaner for 3 minutes to remove uncured resin from the surface.
• Rinse the model’s surface with isopropyl alcohol (IPA) or alcohol, and use a brush if necessary to ensure all resin residue is removed.

Cure Settings

• Default: 5 minutes in a UV resin curing box.
• If the print remains sticky after curing, clean it again using IPA and a toothbrush, then place it under UV light for further curing

• Technical Data Sheet (TDS)
• Safety Data Sheet (MSDS)